Automatic Mold Washer

 Features

made of stainless steel
with adjustable legs
in the 4 apartments there are 42 horizontal nozzles  and 7 vertically rotating nozzles which going up and down with pistons
in each compartment there is a pump 30000 lt / h,
the heating system in the first to the second and third compartments is with exchamges and the temperature reaches 80 cc.
the ceiling has a ventilation system
has 4 doors to make control of the injectors
3 stainless steel steam / liquid stainless steel tube exchangers. with the possibility of heating the hot water or alkaline solution at 80 ° C in about 20 minutes
16 stainless automatic pneumatic valves for filling with water the 4 tanks, emptying the 4 first tanks, recirculation of 4 tanks and introducing steam to the exchangers. there are electric solenoid valves for activating the pneumatic valves.
level sensors for high and low level of each tank from the first 4 tanks. proximity sensor to secure the location of the tape
a conductivity meter for indicating and adjusting the density of the alkaline solution in the second tank.
display and control of temperature in hot water and alkaline solution
indication and control of pneumatic piston operation of the nozzles in the first 3 tanks. the anticipated control may also be proportional for a smoother operation of the cylinders
a special dosing pump for dosing the solution
stainless steel panel for controlling and adjusting the system
the panel will feature a 5.7 "touch screen Siemens . the panel includes an inverter to control the chain by adjusting the speed of the screen. the table contains plc. Siemens and allows control of 4 recirculation pumps and 1 dosing pump